FAQs: Melody Mirror

The Melody Mirror is charged using the USB-C cable provided, in any USB-C-friendly port.

It may take up to 3.5 hours to fully charge the battery. The charge on your Melody Mirror will last up to 2 hours and 30 minutes on normal settings.

The Melody Mirror has 3 light settings: Bright, Warm and Cool.

Yes, you can dim the LED lights on the face of the mirror by pressing and holding down the button on the front repeatedly, until you find the setting that suits you best.

Insert the mirror foot into the base, then twist clockwise to lock in place.

The Melody Mirror is 330mm x 202mm.

The Melody Mirror does not need to be plugged into a power source to work. The Melody Mirror is rechargeable.

To connect your device to the Melody Mirror, you need to hold down the Bluetooth Power Button at the back of the mirror to turn on the Bluetooth. The button on the front will flash blue when it is ready to connect to your device. Select ‘Melody Mirror’ from the list of available Bluetooth pairings on your device.

If you need to connect a new device, press the rear Bluetooth Power Button again and you will be able to pair a new device with the Melody Mirror.

You can download a copy of the instructions here